APPLICATION AND GENERAL CHARACTERISTICS

N609 shunting pipeline is designed mainly for sprinkling irrigation in large-size farms, equipped with underground sprinkling network with 500 m spacing between distributing pipes with hydrants. Pipeline construction makes it possible to be used also in networks with different spacing of underground distributing pipes with hydrants, and also with the use of surface supplying pipelines. By means of N609 shunting pipeline it is possible to irrigate all plant species with the height less than 0,8 m. Spray irrigation of liquid manure and industrial wastes which do not cause earlier corrosion is possible with the use of proper sprinklers - not very sensitive to clogging by permanent parts.

N609 SHUNTING PIPELINE

TECHNICAL DATA

type: N609
Nominal width of spray irrigation: 250 m
length of a single pipe: 10 m
diameter of an outer pipe: 108 mm
pipe wall thickness: 2 mm
maximal number of pipes: 24 szt.
diameter of pipeline's beam wheel: 1500 mm
length of connector: 5 m
type of an internal-combustion engine: HONDA GX 200 SX4
horse-power: 6,5 kM
number of rotations (rotations/minute): 3000
sprinklers: any type with connecting outer thread G 1 1/4, G 1, G 3/4 in accordance with pn-73/m-02030 or Rc 1 1/4, Rc 1, Rc 3/4 in accordance with PN-73/M-02031
number of sprinklers(number): max. 24
pressure of pipeline test: 1 (ok.10) MPa/at.
shunting speed(m/min.): 7,8
sprinlers spacing: 10,20,30,40,.. m

Demonstrating drawing

Driving carriage

The diagram showing irrigation of crops with the use of 4 shunting pipelines, working at the same time (dimensions given in meters)